100% Free Real Updated FCP_FMG_AD-7.6 Questions & Answers Pass Your Exam Easily
Easily To Pass New FCP_FMG_AD-7.6 Verified & Correct Answers
Fortinet FCP_FMG_AD-7.6 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
NEW QUESTION # 17
Refer to the exhibit. FortiManager is operating behind a network address translation (NAT) device, and the administrator configured the FortiManager NATed IP address under the FortiManager system administration settings.
What is the expected result during discovery?
- A. FortiManager sets both the 100.65.0.120 IP address and 10.0.13.120 IP address on FortiGate.
- B. FortiManager sets the 100.65.0.120 IP address on FortiGate.
- C. FortiManager sets the 100.65.0.101 IP address on FortiGate.
- D. FortiManager sets both the 100.65.0.120 IP address and 100.65.0.101 IP address on FortiGate.
Answer: B
Explanation:
When FortiManager is behind a NAT device, setting the NATed IP address (100.65.0.120) in the system admin settings causes FortiManager to use that NATed IP address for communication and configuration with FortiGate during discovery and management operations.
NEW QUESTION # 18
Refer to the exhibit. A junior administrator is troubleshooting a FortiManager connectivity issue that is occurring with a managed FortiGate device.
Given the FortiManager device manager settings shown in the exhibit, what can you conclude from this scenario?
- A. The administrator can reclaim the FortiGate to FortiManager protocol (FGFM) tunnel to get the device online.
- B. The administrator must refresh the device to restore connectivity.
- C. The administrator recently restored a FortiManager configuration file.
- D. FortiManager lost internet connectivity, therefore, the device appears to be down.
Answer: C
Explanation:
FMG is in offline mode, which is activated after restoring a configuration file.
NEW QUESTION # 19
Push updates are failing on a FortiGate device located behind a network address translation (NAT) device?
Which two settings should the administrator check to correct this problem? (Choose two.)
- A. Make sure the virtual IP address and the correct ports are configured on the NAT device.
- B. Make sure the Bind to IP address option on the FortiGuard service interface is set to the virtual IP address from the NAT device.
- C. Make sure the NAT device IP address and the correct ports are configured on FortiManager.
- D. Make sure FortiGuard updates and web service are enabled on the FortiGuard service interface.
Answer: A,C
Explanation:
FortiManager must have the NAT device's IP address and correct ports configured to communicate properly with the FortiGate behind NAT.
The NAT device must have the correct virtual IP address and ports configured to allow push updates to reach the FortiGate device.
NEW QUESTION # 20
An administrator has enabled Service Access on FortiManager. What is the purpose of Service Access on the FortiManager interface?
- A. It allows FortiManager to respond to requests for FortiGuard services from FortiGate devices.
- B. It allows FortiManager to determine the connection status of managed devices.
- C. It allows third-party applications to gain read/write access to FortiManager.
- D. It allows administrative access to FortiManager.
Answer: A
Explanation:
Select the Fortinet services that are allowed access on this interface. These include FortiGate Updates and Web Filtering. Service access is not enabled on any port by default.
NEW QUESTION # 21
A service provider administrator has assigned a global policy package to a managed customer ADOM named My_ADOM. The customer administrator has access only to My_ADOM.
How can the customer administrator edit the global header policy of the global policy package?
- A. The customer administrator can edit the header policy by using workspace mode on the global ADOM.
- B. The customer administrator can edit the header policy by using workflow mode on the global ADOM and My_ADOM.
- C. The service provider administrator can unlock the global policy from the global ADOM to authorize changes to the customer administrator.
- D. The customer administrator cannot edit the global header policy; only the service provider administrator can make changes from the global ADOM.
Answer: D
Explanation:
The global policy package is managed only from the global ADOM by the service provider administrator.
Customer administrators with access solely to their ADOM (My_ADOM) cannot edit the global header policy; such changes must be made by the service provider administrator in the global ADOM.
NEW QUESTION # 22
Refer to the exhibit.
An administrator added a FortiGate device to FortiManager with the default object settings at the ADOM layer.
What can you conclude from the import policy package process of the HQ-NGFW- 1 device?
- A. The administrator must select Per Platform for all interfaces to correctly detect all interfaces from HQ- NGFW-1.
- B. FortiGate may not work as expected when the administrator does not import all objects.
- C. FortiManager will create LAN, port4, and port6 as normalized interfaces at the ADOM layer.
- D. The administrator must manually create the port4 interface on the ADOM layer to avoid import policy errors.
Answer: C
Explanation:
The import process shows that FortiManager will create normalized interfaces named LAN, port4, and port6 at the ADOM layer, mapping them to the corresponding device interfaces based on the import settings.
NEW QUESTION # 23
Refer to the exhibit.
An administrator created two new meta fields in FortiManager.
Which operation can you perform with these parameters?
- A. You can add them to objects as custom attributes.
- B. You can export them to be used in other ADOMs.
- C. You can use them as variables in scripts.
- D. You can invoke them using the $ character.
Answer: A
Explanation:
Meta fields in FortiManager can be added to objects as custom attributes, allowing administrators to categorize and add additional information to firewall objects for easier management and identification.
NEW QUESTION # 24
Refer to the exhibits. An administrator runs the reload failure command diagnose test deploymanager reloadconf 262 on FortiManager.
Why does the administrator receive an error message?
- A. The administrator just recently added FortiGate HQ-NGFW as a model device.
- B. The administrator must use the FortiGate name instead of the ID number.
- C. FortiManager requires the FortiGate serial number instead of the ID number.
- D. FortiManager does not support FortiOS version 7.0.
Answer: A
Explanation:
The error occurs because the FortiGate HQ-NGFW device with ID 262 is a newly added model device and has not yet been fully synchronized or installed with a configuration package, which causes the reload configuration command to fail.
NEW QUESTION # 25
Refer to the exhibit.
Which two statements about the output are true? (Choose two.)
- A. The latest revision history for the managed FortiGate does not match the device-level database.
- B. The system template default will override device-level database configurations.
- C. The latest revision history for the managed FortiGate does match the FortiManager policy database.
- D. Configuration changes have been installed on FortiGate, updating policy and device-level database.
Answer: A,B
Explanation:
The status "pending" indicates the latest revision history does not match the device-level database, meaning there are unapplied changes.
The template is marked as [modified], so the system template default will override device-level database configurations when installed.
NEW QUESTION # 26
You want to let multiple administrators work in the same ADOM without creating configuration conflicts.
What is the best and the most effective solution to apply?
- A. Enable workflow mode, which is the only way to prevent concurrent configuration conflicts.
- B. Assign administrators with JSON API access to the FortiManager.
- C. Activate workspace mode in the ADOM settings.
- D. Configure RADIUS authentication to assign ADOM roles to each user.
Answer: C
Explanation:
Activating workspace mode in the ADOM settings allows multiple administrators to work concurrently in the same ADOM by isolating their configuration changes in separate workspaces, preventing conflicts and enabling effective collaboration.
NEW QUESTION # 27
Refer to the exhibits.
An administrator has been asked to install the same policies from a central policy package onto the BR1-FGT-
1 firewall.
The administrator added BR1-FGT-1 as a target in the central policy package installation.
What should the administrator do when reinstalling the central policy package on the BR1-FGT-1 firewall?
- A. Use the install wizard to install the central policy package on the BR1-FGT-1 firewall.
- B. Import the policy package to change the unknown status and synchronize the policy package.
- C. First resolve the modified status in the configuration and provisioning templates to allow a smooth installation.
- D. Assign only one policy package to the firewall because FortiManager does not allow more than one policy package assigned per device at the same time.
Answer: A
Explanation:
Using the Install Wizard is the recommended method to reinstall the central policy package on the BR1-FGT-
1 firewall, ensuring all settings, installation targets, and dependencies are correctly processed during installation.
NEW QUESTION # 28
Refer to the exhibit.
What can you conclude from the downloaded import report?
- A. The administrator will see a new policy package named Remote-FortiGate_root in the FortiManager ADOM database.
- B. FortiManager will change the configuration of REMOTE_SUBNET to match the interface mapping coming in from Remote-FortiGate.
- C. As a result of this policy import process, FortiManager will create a new firewall address called REMOTE_SUBNET in the ADOM database.
- D. FortiManager does not support per-device mapping for firewall addresses.
Answer: A
Explanation:
The import report shows that a new policy package named Remote-FortiGate_root will be created in the FortiManager ADOM database, but some firewall addresses and policies failed to import due to interface binding conflicts.
NEW QUESTION # 29
An administrator is copying a system template profile between ADOMs by running the following command:
execute fmprofile export-profile ADOM 3547 /tmp/Backup_File
output dump to file: [/tmp/Backup_File]
Where does this command export the system template profile from?
- A. FortiManager configuration backup file
- B. FortiManager /tmp/Backup_File folder
- C. ADOM device database
- D. FortiManager ADOM policy database
Answer: D
Explanation:
The command exports the system template profile from the FortiManager ADOM policy database, which stores the configuration templates for devices within that ADOM.
NEW QUESTION # 30
Refer to the exhibit.
If the monitored interface for the primary FortiManager device fails, what must you do to maintain high availability (HA)?
- A. Reconfigure the primary device to remove the peer IP address of the failed device from its configuration.
- B. Manually promote one of the working secondary devices to the primary role: and reboot the original primary device to remove the peer IP address of the failed device.
- C. Check the integrity database of the primary device to force a secondary device to become the new primary with all active interfaces.
- D. The FortiManager HAfailover is transparent to administrators and does not require any additional action.
Answer: D
Explanation:
In a FortiManager HA cluster configured with VRRP failover, the failover process is automatic and transparent to administrators. If the monitored interface on the primary device fails, the secondary device takes over without requiring manual intervention to maintain HA.
NEW QUESTION # 31
An administrator has assigned a global policy package to a new ADOM named ADOM1.
What will happen if the administrator tries to create a new policy package in ADOM1?
- A. FortiManager will automatically install policies on the policy package in ADOM1.
- B. The administrator will have to assign the global policy package from the global ADOM.
- C. The administrator will be able to select the option to assign the global policy package to the new policy package.
- D. FortiManager will automatically assign the global policy package to the new policy package.
Answer: C
Explanation:
When a global policy package is assigned to an ADOM, administrators creating new policy packages within that ADOM have the option to select and assign the global policy package to the new policy package if desired.
NEW QUESTION # 32
......
Free FCP_FMG_AD-7.6 Exam Files Downloaded Instantly: https://2cram.actualtestsit.com/Fortinet/FCP_FMG_AD-7.6-exam-prep-dumps.html