[Apr 19, 2026] NCA-6.10 Exam Dumps 100% Same Q&A In Your Real Exam
NCA-6.10 Test Engine Dumps Training With 78 Questions
NEW QUESTION # 25
At what time does LCM auto-inventory run by default?
- A. 2:00am
- B. 1:00am
- C. 4:00am
- D. 3:00am
Answer: D
NEW QUESTION # 26
An administrator has spent time correcting specific issues that have been identified by NCC Health Checks in Prism Element.
How can just the checks that previously did not pass be executed again to confirm they are all resolved?
- A. Select Run Check for each check worked.
- B. Select Only Failed And Warning Checks.
- C. Run ncc health checks run_all.
- D. Run LCM Pre-Upgrade to trigger NCC Checks.
Answer: B
Explanation:
To rerun only the health checks that previously failed or issued warnings, the administrator can select theOnly Failed and Warning Checksoption in Prism Element. This targeted approach helps verify that resolved issues have been addressed without rerunning all checks unnecessarily.
Steps:
* Navigate toPrism Element > Health > NCC Checks.
* Filter forOnly Failed and Warning Checksand rerun them.
Other options:
* A. Run LCM Pre-Upgrade: Runs pre-upgrade checks, not related to health check validation.
* B. Runncc health_checks run_all: Executes all checks, not just failed ones.
* C. Select Run Check for each check worked: Requires manual execution for each check.
References:
Nutanix Administration Guide - Health Checks.
Nutanix Cluster Check (NCC) Documentation.
NEW QUESTION # 27
What is true when adding a storage-only node to the cluster?
- A. It must have the same hypervisor as the other nodes in the cluster.
- B. Nutanix Objects must be deployed.
- C. It can have a different hypervisor than the other nodes in the cluster.
- D. Nutanix Files must be deployed.
Answer: A
Explanation:
The correct answer isC. It must have the same hypervisor as the other nodes in the cluster.
When adding astorage-only (SO) nodeto a Nutanix cluster:
* It mustrun the same hypervisoras the existing nodes.
* The SO node doesnot host VMsbut participates in thestorage layerto increase capacity and performance.
* Nutanix currentlydoes not support mixed hypervisors(e.g., combining AHV with ESXi) within the same cluster, even for storage-only nodes.
Clarifications:
* A & B:Neither Nutanix Files nor Objects are required for adding storage-only nodes.
* D:Cross-hypervisor configuration is unsupported at the cluster level.
Official Reference:
* Nutanix Hardware Administration Guide - Storage-Only Node Requirements
* Excerpt: "All nodes in a cluster, including storage-only nodes, must run the same hypervisor type."
NEW QUESTION # 28
Which feature allows the ability to enable auto-update for NCC?
- A. LCM Auto Inventory
- B. LCM HTTPS
- C. Daily Digest
- D. Pulse
Answer: D
Explanation:
The correct answer isC. Pulse.
Pulseis Nutanix's integrated telemetry and support communication service. WhenPulse is enabled, it provides automatic delivery and updates of Nutanix software tools, including theNutanix Cluster Check (NCC)utility.
This allows the system toautomatically download and apply newer versions of NCCwithout requiring manual intervention.
Clarifications:
* A (LCM HTTPS):Refers to LCM transport protocol, unrelated to NCC updates.
* B (Daily Digest):A reporting feature, not an update mechanism.
* D (LCM Auto Inventory):Related to firmware/software inventory, not to NCC or system utilities.
Prism UI Navigation Path:
Settings > Pulse > Enable Pulse
Official Reference:
* Nutanix NCC Administration Guide
* Nutanix Support FAQ
* Excerpt: "NCC auto-update is available when Pulse is enabled, allowing Nutanix to deliver updated NCC versions directly to the cluster."
NEW QUESTION # 29
What is the purpose of the Recycle Bin?
- A. Stores the OpLog's most recent deleted data in case of a CVM failure.
- B. Keeps deleted VMs for 24 hours for recovery.
- C. Centralizes the deleted data from the different VMs in the cluster.
- D. Allows administrators to undo the last five actions.
Answer: B
NEW QUESTION # 30
Which hypervisor supports integrated IP address management (IPAM)?
- A. AHV
- B. Hyper-V
- C. ESXi
- D. XenServer
Answer: A
NEW QUESTION # 31
Shared storage for Windows Server Failover Clustering (WSFC) is a use case for which Nutanix Unified Storage solution?
- A. RF2
- B. Files
- C. Volumes
- D. FT1
Answer: C
Explanation:
Shared storage for Windows Server Failover Clustering (WSFC) is a use case for NutanixVolumes. Nutanix Volumes provides block storage (via iSCSI) to external systems, such as WSFC nodes, allowing them to share storage for failover clustering. This configuration is essential for high availability in Windows environments.
Other options:
* Files: Provides file-based storage (NFS/SMB), not suited for WSFC shared block storage.
* FT1 and RF2: Refer to Fault Tolerance and Redundancy Factor, not storage solutions.
:
Nutanix Unified Storage Guide - Volumes Use Cases.
Nutanix Best Practices for Windows Clustering.
NEW QUESTION # 32
A Veeam Backup appliance, which uses iSCSI, must be deployed into an AHV-based cluster.
What must be configured to allow Veeam to connect to the Nutanix cluster?
- A. Data Services IP
- B. Network Segmentation
- C. Nutanix Objects
- D. Prism Central
Answer: A
NEW QUESTION # 33
An administrator has been directed to ensure that all Prism Element and Prism Central clusters allow Nutanix Support to gather logs without needing engagement.
What should the administrator enable to meet this requirement?
- A. Proxy Server
- B. Self-Service
- C. NKP
- D. Pulse
Answer: D
Explanation:
To allow Nutanix Support to gather logs automatically without requiring manual intervention, the administrator should enablePulse. Pulse is a telemetry service that collects and sends system health, log, and usage data to Nutanix Support securely.
Steps:
* Navigate toPrism Central > Settings > Pulse.
* Enable the service and configure as required for your environment.
Other options:
* Self-Service: Refers to role-based access for users, unrelated to log collection.
* Proxy Server: Used for network communication, not log gathering.
* NKP: Refers to Nutanix Cluster Protocol, unrelated to telemetry.
:
Nutanix Administration Guide - Pulse Configuration.
Nutanix Support Portal - Pulse Service Details.
NEW QUESTION # 34
Which storage container option reduces the available storage to other containers?
- A. Capacity Deduplication
- B. Advertised Capacity
- C. Erasure Coding
- D. Reserved Capacity
Answer: D
Explanation:
TheReserved Capacityoption in a storage container explicitly reserves a portion of cluster storage for that container. This reservation reduces the amount of storage available for other containers. Reserved Capacity ensures that specific workloads have guaranteed storage resources, preventing resource contention or overcommitment.
Other options:
* Advertised Capacity: Defines the storage limit displayed to users but does not reserve storage.
* Erasure Coding: Optimizes storage efficiency but does not reduce available capacity.
* Capacity Deduplication: Reduces space consumption by eliminating duplicate data but does not affect other containers' storage.
:
Nutanix Storage Best Practices Guide.
Nutanix Prism UI Help - Storage Container Configuration.
WSZC
NEW QUESTION # 35
How can an administrator work with Nutanix Support to recover a deleted VM, in its most up-to-date status, within a 24-hour period of the VM being deleted?
- A. Use the Recycle Bin.
- B. Use third party tools.
- C. Use NC2 on AWS.
- D. Use Nutanix Recovery Plan.
Answer: A
Explanation:
The correct answer isB. Use the Recycle Bin.
TheRecycle Binfeature in Nutanix enablessoft deletion of VMs, where the deleted VM is retained in a non- visible state for24 hoursby default before being purged. During this retention window:
* NutanixSupportcan assist in recovering the VM in itsmost up-to-date state.
* No snapshots or backups are required for this recovery mechanism.
* TheRecycle Bin is enabled by defaultin recent AOS versions.
UI Path (for visibility):
This functionality is internal and requires Support engagement for recovery.
Clarification:
* A (Nutanix Recovery Plan):Used with NearSync or Async DR; does not recover recently deleted VMs automatically.
* C (NC2 on AWS):Disaster recovery infrastructure, not applicable to local deleted VM recovery.
* D (Third-party tools):Irrelevant to Nutanix native functionality.
Official Reference:
* Nutanix Administration Guide - VM Recovery using Recycle Bin
* Excerpt: "Deleted VMs can be recovered by Nutanix Support within 24 hours using the Recycle Bin soft-delete capability."
NEW QUESTION # 36
When multiple Alert policies are applied to an entity, which will take precedence?
- A. Policy are applied to an entity type in a category.
- B. Policy are applied to an entity type in a cluster.
- C. Policy are applied to a specific entity type.
- D. Policy are applied to all entities of an entity type.
Answer: C
Explanation:
When multiple alert policies are applied to an entity, Nutanix uses a hierarchical approach. Policies applied to an entity type within a categorytake precedence. For example:
* If a category (e.g., "Production") has policies applied to entities like VMs, and the entity matches that category, the category-specific policy will override general policies.
* This prioritization allows administrators to fine-tune alert policies for specific workloads or environments.
:
Nutanix Alerts Management Guide - Policy Precedence Overview.
Nutanix University Certification Training Material.
NEW QUESTION # 37
Which statement best describes the Storage Pool?
- A. Group of vDisks
- B. Group of physical disks
- C. Group of boot drives
- D. Group of Storage Containers
Answer: B
Explanation:
The correct answer isB. Group of physical disks.
In Nutanix architecture:
* AStorage Poolis theaggregation of physical storage devices(SSD, HDD) across all nodes in a cluster.
* Each storage pool backs one or moreStorage Containers, which are logical partitions used for data placement.
* Storage poolscannot span clustersand are always confined to the cluster in which they are defined.
Clarifications:
* A (Storage Containers): These are logical groupingswithinstorage pools.
* C (Boot Drives): These are not part of the pool.
* D (vDisks): These exist within VMs and are backed by containers, not pools directly.
Prism UI Navigation Path:
Storage > Storage Pools
Official Reference:
* Nutanix Bible - Storage Pool Definition
* Nutanix Storage Admin Guide
* Excerpt: "A storage pool is made up of physical disks from one or more nodes and serves as the physical storage foundation for containers."
NEW QUESTION # 38
An administrator is using LCM at a connected site to update various components on a Nutanix cluster and notices that the LCM Framework is not updated to the current version.
What step should the administrator take to ensure LCM is updated to the latest release?
- A. Upgrade AOS
- B. Perform an inventory.
- C. Restart genesis across the cluster.
- D. Run an NCC health check.
Answer: B
Explanation:
The correct answer isC. Perform an inventory.
To ensure theLCM Frameworkand its associated component metadata are updated, the administrator must perform afresh LCM inventory. This process:
* Retrieves the latest metadata and framework version from the Nutanix support portal (if the cluster is connected).
* Detects current component versions and identifies available updates.
Clarifications:
* A (Upgrade AOS):LCM is independent of AOS version updates.
* B (Restart genesis):Unnecessary and not relevant to LCM framework versioning.
* D (NCC):Useful for cluster health, but does not affect LCM updates.
Prism Central UI Navigation Path:
Operations > LCM > Perform Inventory
Official Reference:
* Nutanix LCM Guide - Updating the LCM Framework
* Excerpt: "To receive the latest framework version and component metadata, perform an LCM inventory on a connected cluster."
NEW QUESTION # 39
An administrator is considering a data protection strategy between two sites. There is a 10ms round trip latency between the two clusters. Which data protection solution can the administrator implement that minimizes data loss in the event of a disaster?
- A. Metro Availability
- B. Synchronous Replication
- C. NearSync Replication
- D. Async DR
Answer: C
Explanation:
The correct answer isA. NearSync Replication.
Key Concepts from Official Nutanix Documentation:
Nutanix supports various types of data replication methods depending on the Recovery Point Objective (RPO), Recovery Time Objective (RTO), and the latency between the sites.
* Metro Availabilityrequires a maximum latency of<5ms RTTand is used forzero RPO synchronous replication. Since the given latency is 10ms,Metro Availability is not supportedin this case.
Reference: Nutanix Bible - Metro Availability Section
Prism UI Navigation: Protection Domains > Metro Availability
Synchronous Replicationis often synonymous withMetro Availabilityin Nutanix's implementation. Thus, it is similarly bound by the <5ms RTT requirement.
Async DR (Asynchronous Disaster Recovery)allows for more relaxed RPOs, typically1 hour or more, which doesnot minimize data lossin the event of a disaster.
NearSync Replicationsupports anRPO as low as 1 minuteand issuitable for up to 20ms RTT latency. It utilizeslightweight snapshotsandschedule-based replicationto deliverlow-RPO protectioneven over relatively long distances and moderate latencies.
Reference: Nutanix Data Protection Guide - NearSync Overview
Prism UI Navigation: Data Protection > Protection Domains > Schedule (with 1-minute RPO option) Detailed Source References:
Nutanix Data Protection and DR Guide - v5.x and later:"NearSync replication enables you to achieve RPOs as low as 1 minute and is designed to work with round-trip latencies of up to 20ms." Prism Central UI:Navigate toProtection > Data Protection > Protection Domains > Create Schedule# Set schedule type to "NearSync" and observe the 1-minute RPO options.
Hence, since 10ms RTTexceeds Metro Availability requirementsbut iswell within NearSync's acceptable latency, the best choice thatminimizes data lossis:
NEW QUESTION # 40
An administrator needs to verify whether the cluster is protected currently from potential data loss due to a component failure.
From the Prism Element Home dashboard, how should the administrator accomplish this task?
- A. Select the gear icon and then select Pulse.
- B. Click on Home and then Alerts.
- C. Look at the Data Resiliency Status widget.
- D. Navigate to the Health dashboard.
Answer: C
NEW QUESTION # 41
Which workload type would be a good fit for NFS on Objects?
- A. End user computing workloads
- B. Large-scale, read heavy workloads
- C. Workloads that are updated frequently
- D. Filesystems used for transitory or work spaces
Answer: B
Explanation:
The correct answer isC. Large-scale, read heavy workloads.
NFS on Objectsis a Nutanix feature allowingNFS clients to interact with Nutanix Objects (S3-compatible object storage)by exposing object buckets viaNFS v3 protocol. This is ideal for workloads that require:
* Large-scale access to unstructured data
* High read concurrency
* Cost-effective storage for infrequently changed files
Best Use Case:
Backup archives, analytics workloads, image repositories, or video streaming systems withread-heavy profiles.
Clarifications:
* A (EUC workloads):Typically require fast, low-latency block storage (e.g., vDisks).
* B (Transitory FS):Better suited for file services like Nutanix Files.
* D (Frequent updates):Not ideal for object storage via NFS; performance will degrade under frequent write operations.
Official Reference:
* Nutanix Objects with NFS Gateway - Best Practices
* Nutanix Documentation Portal - Objects and NFS
* Excerpt: "NFS on Objects is best suited for large-scale, read-heavy use cases where file system semantics are needed on top of object-based storage."
NEW QUESTION # 42
An administrator needs to ensure that the three VMs of an application cluster are never placed onto the same hypervisor by creating a VM- VM Anti-Affinity Policy.
What should the administrator use to complete this task?
- A. Ncli
- B. Prism Element
- C. acli
- D. Prism Central
Answer: B
NEW QUESTION # 43
......
NCA-6.10 Practice Test Pdf Exam Material: https://2cram.actualtestsit.com/Nutanix/NCA-6.10-exam-prep-dumps.html