Free API API-570 Exam Questions and Answer from Training Expert ActualTestsIT
Top API API-570 Courses Online
API-570 certification exam covers a wide range of topics related to piping inspection, including metallurgy, welding, non-destructive testing, corrosion mechanisms, and inspection techniques. API-570 exam is designed to test the inspector's knowledge of industry codes and standards such as ASME B31.3, ASME Section V, and API RP 571. API-570 exam also tests the inspector's ability to interpret inspection reports and make sound decisions based on the information provided.
To qualify for the API-570 certification exam, candidates must have a minimum of three years of experience in piping inspection, and a degree or equivalent qualification in engineering or a related field. They must also demonstrate their knowledge and understanding of industry standards and codes, including API 570, ASME B31.3, and other regulations related to the inspection and maintenance of piping systems.
NEW QUESTION # 67
When heat treating welded joints between dissimilar ferritic metals, the temperature range shall be for which metal?
- A. The one with the higher temperature range
- B. The average of both materials
- C. Either one may be used
- D. The one with the lower temperature range
Answer: A
NEW QUESTION # 68
Welding repairs of cracks that occurred in-service should not be attempted without prior consultation with the
- A. plant manager
- B. welding foreman
- C. inspector only
- D. piping engineer
Answer: D
NEW QUESTION # 69
A welder who tests on a ½" thick plate, groove weld in the 3G position is also qualified to weld in which other plate position?
- A. Flat and horizontal
- B. All plate positions
- C. Vertical only
- D. Flat
Answer: D
NEW QUESTION # 70
After application of a non destructive evaluation technique, any resulting evidence is commonly referred to as
- A. A crack
- B. an indication
- C. a leak
- D. porosity
Answer: B
NEW QUESTION # 71
Why should a leaking threaded joint not be tightened while the system is in service?
- A. Rust or corrosion might be holding the pressure
- B. A crack in a thread root might fail
- C. The craftsman should not be near the threaded connection
- D. The joint might be unscrewed
Answer: B
NEW QUESTION # 72
When a welder has not welded with a process during a period of, his qualifications for that process shall expire
- A. 6 months or more
- B. 12 months or more
- C. 9 months or more
- D. 3 months or more
Answer: A
NEW QUESTION # 73
Actively engaged as an authorized piping inspector shall be defined as a minimum of time spent performing inspection activities.
- A. 40%
- B. 20%
- C. 50%
- D. 30%
Answer: B
NEW QUESTION # 74
A specialized valve generally used in erosive or high-temperature service is a valve
- A. globe
- B. swing check
- C. plug
- D. slide
Answer: D
NEW QUESTION # 75
An operator notice a pipe off its support, what should be done?
- A. Contact maintenance personnel for immediate repair
- B. Ignore the situation
- C. Report the situation to engineering or inspection personnel
- D. Keep a record of the situation for future reference
Answer: C
NEW QUESTION # 76
Aboveground piping is subject to atmospheric corrosion.
What is buried piping subject to?
- A. Anodic reaction
- B. Erosion
- C. Soil electrolytes
- D. Soil corrosion
Answer: D
NEW QUESTION # 77
What should have been the correct number and type of guide bends on the PQR?
- A. 6 side bends
- B. 2 face and 2 root bends
- C. 1 side, 1 face and 1 root bend
- D. No side bends required
Answer: D
NEW QUESTION # 78
API 570 covers the inspection of__________.
- A. new tank construction
- B. In-service piping
- C. new construction
- D. In-service vessels
Answer: B
NEW QUESTION # 79
What is the maximum allowable deviation for the ammeter on each piece of magnetizing equipment?
- A. 20%
- B. 10%
- C. 30%
- D. 15%
Answer: B
NEW QUESTION # 80
The weld ripples of reinforcement of butt-welded joints shall be before radiography.
- A. removed if irregularities mask discontinuities
- B. removed
- C. ground flush, with grinding direction perpendicular to the weld
- D. ground flush, with grinding direction parallel to the weld
Answer: A
NEW QUESTION # 81
The acronym CUI refers to.
- A. Corrosion Under Insulation
- B. Corrosion Under Inside flow
- C. Cold Under-ground In-service piping
- D. Carpet Under Infra-structure
Answer: A
NEW QUESTION # 82
......
API 570 certification is highly valued in the oil and gas industry, and many companies require their piping inspectors to hold this certification. By obtaining this certification, individuals can advance their careers and increase their earning potential. The API 570 certification is a rigorous and challenging exam, but with the right preparation and study material, individuals can successfully pass the exam and demonstrate their expertise in the field of piping inspection.
New (2024) API API-570 Exam Dumps: https://2cram.actualtestsit.com/API/API-570-exam-prep-dumps.html