[Jul 16, 2025] NSE7_OTS-7.2 Sample with Accurate & Updated Questions
NSE7_OTS-7.2 Exam Info and Free Practice Test | ActualTestsIT
NEW QUESTION # 42
An OT supervisor has configured LDAP and FSSO for the authentication. The goal is that all the users be authenticated against passive authentication first and, if passive authentication is not successful, then users should be challenged with active authentication. What should the OT supervisor do to achieve this on FortiGate?
- A. Configure a firewall policy with FSSO users and place it on the top of list of firewall policies.
- B. Under config user settings configure set auth-on-demand implicit.
- C. Enable two-factor authentication with FSSO.
- D. Configure a firewall policy with LDAP users and place it on the top of list of firewall policies.
Answer: A
Explanation:
The OT supervisor should configure a firewall policy with FSSO users and place it on the top of list of firewall policies in order to achieve the goal of authenticating users against passive authentication first and, if passive authentication is not successful, then challenging them with active authentication.
NEW QUESTION # 43
Refer to the exhibit.
PLC-3 and CLIENT can send traffic to PLC-1 and PLC-2. FGT-2 has only one software switch (SSW-1) connecting both PLC-3 and CLIENT. PLC-3 and CLIENT can send traffic to each other at the Layer 2 level.
What must the OT admin do to prevent Layer 2-level communication between PLC-3 and CLIENT?
- A. Create a VLAN for each device and replace the current FGT-2 software switch members.
- B. Set a unique forward domain for each interface of the software switch.
- C. Implement policy routes on FGT-2 to control traffic between devices.
- D. Enable explicit intra-switch policy to require firewall policies on FGT-2.
Answer: A,B
NEW QUESTION # 44
Which two frameworks are common to secure ICS industrial processes, including SCADA and DCS? (Choose two.)
- A. IEC104
- B. NIST Cybersecurity
- C. Modbus
- D. IEC 62443
Answer: A,D
NEW QUESTION # 45
Which type of attack posed by skilled and malicious users of security level 4 (SL 4) of IEC 62443 is designed to defend against intentional attacks?
- A. Users with access to moderate resources
- B. Users with low access to resources
- C. Users with unintentional operator error
- D. Users with substantial resources
Answer: C
NEW QUESTION # 46
Refer to the exhibit.
You are navigating through FortiSIEM in an OT network.
How do you view information presented in the exhibit and what does the FortiGate device security status tell you?
- A. In the widget dashboard and there are one or more high-severity incidents for the FortiGate device.
- B. In the PCI logging dashboard and there are one or more high-severity security incidents for the FortiGate device.
- C. In the summary dashboard and there are one or more high-severity security incidents for the FortiGate device.
- D. In the business service dashboard and there are one or more high-severity security incidents for the FortiGate device.
Answer: C
NEW QUESTION # 47
Refer to the exhibit.
You need to configure VPN user access for supervisors at the breach and HQ sites using the same soft FortiToken. Each site has a FortiGate VPN gateway.
What must you do to achieve this objective?
- A. You must use the user self-registration server.
- B. You must register the same FortiToken on more than one FortiGate.
- C. You must use a third-party RADIUS OTP server.
- D. You must use a FortiAuthenticator.
Answer: D
NEW QUESTION # 48
Refer to the exhibit, which shows a non-protected OT environment.
An administrator needs to implement proper protection on the OT network.
Which three steps should an administrator take to protect the OT network? (Choose three.)
- A. Deploy a FortiGate device within each ICS network.
- B. Deploy an edge FortiGate between the internet and an OT network as a one-arm sniffer.
- C. Configure firewall policies with web filter to protect the different ICS networks.
- D. Configure firewall policies with industrial protocol sensors
- E. Use segmentation
Answer: B,C,D
NEW QUESTION # 49
Refer to the exhibit. PLC-3 and CLIENT can send traffic to PLC-1 and PLC-2. FGT-2 has only one software switch (SSW-1) connecting both PLC-3 and CLIENT. PLC-3 and CLIENT cannot send traffic to each other. Which two statements about the traffic between PCL-1 and PLC-2 are true? (Choose two.)
- A. Traffic must be inspected by FGT-EDGE in OT networks.
- B. FGT-2 controls intra-VLAN traffic through firewall policies.
- C. The switch on FGT-2 must be hardware to implement micro-segmentation.
- D. Micro-segmentation on FGT-2 prevents direct device-to-device communication.
Answer: B,D
NEW QUESTION # 50
Refer to the exhibit. PLC-3 and CLIENT can send traffic to PLC-1 and PLC-2. FGT-2 has only one software switch (SSW-1) connecting both PLC-3 and CLIENT. PLC-3 and CLIENT can send traffic to each other at the Layer 2 level.
What must the OT admin do to prevent Layer 2-level communication between PLC-3 and CLIENT?
- A. Create a VLAN for each device and replace the current FGT-2 software switch members.
- B. Set a unique forward domain for each interface of the software switch.
- C. Implement policy routes on FGT-2 to control traffic between devices.
- D. Enable explicit intra-switch policy to require firewall policies on FGT-2.
Answer: A,B
NEW QUESTION # 51
What triggers Layer 2 polling of infrastructure devices connected in the network?
- A. A matched security policy
- B. A linkup or linkdown trap
- C. A failed Layer 3 poll
- D. A matched profiling rule
Answer: B
NEW QUESTION # 52
Which three Fortinet products can you use for device identification in an OT industrial control system (ICS)?
(Choose three.)
- A. FortiSIEM
- B. FortiNAC
- C. FortiManager
- D. FortiGate
- E. FortiAnalyzer
Answer: A,B,D
NEW QUESTION # 53
Refer to the exhibit. An OT architect has implemented a Modbus TCP with a simulation server Conpot to identify and control the Modus traffic in the OT network. The FortiGate-Edge device is configured with a software switch interface ssw-01.
Based on the topology shown in the exhibit, which two statements about the successful simulation of traffic between client and server are true? (Choose two.)
- A. The FortiGate devices is in offline IDS mode.
- B. NAT is disabled in the FortiGate firewall policy from port3 to ssw-01.
- C. Port5 is not a member of the software switch.
- D. The FortiGate-Edge device must be in NAT mode.
Answer: B,D
NEW QUESTION # 54
As an OT administrator, it is important to understand how industrial protocols work in an OT network. Which communication method is used by the Modbus protocol?
- A. It uses OSI Layer 2 and both the primary/secondary devices send data based on a matching token ring.
- B. It uses OSI Layer 2 and the primary device sends data based on request from secondary device.
- C. It uses OSI Layer 2 and both the primary/secondary devices always send data during the communication.
- D. It uses OSI Layer 2 and the secondary device sends data based on request from primary device.
Answer: D
NEW QUESTION # 55
Refer to the exhibit.
Which statement about the interfaces shown in the exhibit is true?
- A. port2, port2-vlan10, and port2-vlan1 are part of the software switch interface.
- B. port1-vlan10 and port2-vlan10 are part of the same broadcast domain
- C. port1, port1-vlan10, and port1-vlan1 are in different broadcast domains
- D. The VLAN ID of port1-vlan1 can be changed to the VLAN ID 10.
Answer: C
NEW QUESTION # 56
An OT architect has deployed a Layer 2 switch in the OT network at Level 1 the Purdue model-process control. The purpose of the Layer 2 switch is to segment traffic between PLC1 and PLC2 with two VLANs.
All the traffic between PLC1 and PLC2 must first flow through the Layer 2 switch and then through the FortiGate device in the Level 2 supervisory control network.
What statement about the traffic between PLC1 and PLC2 is true?
- A. The Layer 2 switch rewrites VLAN tags before sending traffic to the FortiGate device.
- B. The Layer 2 switches routes any traffic to the FortiGate device through an Ethernet link.
- C. PLC1 and PLC2 traffic must flow through the Layer-2 switch trunk link to the FortiGate device.
- D. In order to communicate, PLC1 must be in the same VLAN as PLC2.
Answer: C
Explanation:
The statement that is true about the traffic between PLC1 and PLC2 is that PLC1 and PLC2 traffic must flow through the Layer-2 switch trunk link to the FortiGate device.
NEW QUESTION # 57
What are two critical tasks the OT network auditors must perform during OT network risk assessment and management? (Choose two.)
- A. Creating disaster recovery plans to switch operations to a backup plant
- B. Implementing strategies to automatically bring PLCs offline
- C. Planning a threat hunting strategy
- D. Evaluating what can go wrong before it happens
Answer: A,C
NEW QUESTION # 58
Refer to the exhibit.
Which statement about the interfaces shown in the exhibit is true?
- A. port2, port2-vlan10, and port2-vlan1 are part of the software switch interface.
- B. port1-vlan10 and port2-vlan10 are part of the same broadcast domain
- C. port1, port1-vlan10, and port1-vlan1 are in different broadcast domains
- D. The VLAN ID of port1-vlan1 can be changed to the VLAN ID 10.
Answer: C
NEW QUESTION # 59
Refer to the exhibit.
An OT administrator ran a report to identify device inventory in an OT network.
Based on the report results, which report was run?
- A. A FortiAnalyzer device report
- B. A FortiSIEM incident report
- C. A FortiSIEM CMDB report
- D. A FortiSIEM analytics report
Answer: C
NEW QUESTION # 60
Which three criteria can a FortiGate device use to look for a matching firewall policy to process traffic?
(Choose three.)
- A. Source defined as internet services in the firewall policy
- B. Destination defined as internet services in the firewall policy
- C. Lowest to highest policy ID number
- D. Highest to lowest priority defined in the firewall policy
- E. Services defined in the firewall policy.
Answer: B,D,E
Explanation:
The three criteria that a FortiGate device can use to look for a matching firewall policy to process traffic are:
A: Services defined in the firewall policy - FortiGate devices can match firewall policies based on the services defined in the policy, such as HTTP, FTP, or DNS.
D: Destination defined as internet services in the firewall policy - FortiGate devices can also match firewall policies based on the destination of the traffic, including destination IP address, interface, or internet services.
E: Highest to lowest priority defined in the firewall policy - FortiGate devices can prioritize firewall policies based on the priority defined in the policy. The device will process traffic against the policy with the highest priority first and move down the list until it finds a matching policy.
NEW QUESTION # 61
What two advantages does FortiNAC provide in the OT network? (Choose two.)
- A. It can be used for industrial intrusion detection and prevention.
- B. It can be used for network micro-segmentation.
- C. It can be used for device profiling.
- D. It can be used for IoT device detection.
Answer: C,D
Explanation:
Explanation
Typically, in a microsegmented network, NGFWs are used in conjunction with VLANs to implement security policies and to inspect and filter network communications. Fortinet FortiSwitch and FortiGate NGFW offer an integrated approach to microsegmentation.
NEW QUESTION # 62
Refer to the exhibit.
Based on the topology designed by the OT architect, which two statements about implementing OT security are true? (Choose two.)
- A. IT and OT networks are separated by segmentation.
- B. FortiGate-3 and FortiGate-4 devices must be in a transparent mode.
- C. Firewall policies should be configured on FortiGate-3 and FortiGate-4 with industrial protocol sensors.
- D. Micro-segmentation can be achieved only by replacing FortiGate-3 and FortiGate-4 with a pair of FortiSwitch devices.
Answer: A,C
NEW QUESTION # 63
Refer to the exhibit and analyze the output. Which statement about the output is true?
- A. This is a sample of FortiGate interface statistics.
- B. This is a sample of a FortiAnalyzer system interface event log.
- C. This is a sample of a PAM event type.
- D. This is a sample of an SNMP temperature control event log.
Answer: C
NEW QUESTION # 64
In a wireless network integration, how does FortiNAC obtain connecting MAC address information?
- A. Link traps
- B. End station traffic monitoring
- C. RADIUS
- D. MAC notification traps
Answer: C
Explanation:
FortiNAC can integrate with RADIUS servers to obtain MAC address information for wireless clients that authenticate through the RADIUS server.
NEW QUESTION # 65
Refer to the exhibit. Which statement is true about application control inspection?
- A. The parent signature takes precedence over the child application signature.
- B. You can control security actions only on the parent-level application signature
- C. Security actions cannot be applied on the lowest level of the hierarchy.
- D. The industrial application control inspection process is unique among application categories.
Answer: B
NEW QUESTION # 66
......
Pass Fortinet NSE7_OTS-7.2 Premium Files Test Engine pdf - Free Dumps Collection: https://2cram.actualtestsit.com/Fortinet/NSE7_OTS-7.2-exam-prep-dumps.html