[Oct 19, 2025] ActualTestsIT 350-601 dumps & CCNP Data Center sure practice dumps
Cisco 350-601 Actual Questions and Braindumps
NEW QUESTION # 150
Which nonproprietary protocol is used to access a NAS device?
- A. iSCSI
- B. FCoE
- C. NFS
- D. SMB
Answer: C
Explanation:
NFS (Network File System) is a nonproprietary, open-standard protocol used to access and share files over a network. It is commonly used to access NAS (Network Attached Storage) devices in UNIX/Linux environments. NFS allows multiple clients to access shared storage on a NAS device.
NEW QUESTION # 151
A DevOps engineer must design a solution to push network configurations across a company infrastructure to ensure consistency. The solution must be easy to configure and manage and must support Python and YAML. Which configuration management tool meets these requirements?
- A. Puppet
- B. Chef
- C. Ansible
- D. SaltStack
Answer: C
Explanation:
Ansible is a configuration management tool that is easy to configure and manage. It is particularly known for its simplicity due to its use of YAML for configuration (playbooks) and its compatibility with Python for scripting and automation. Ansible is agentless, which simplifies deployment, and it has strong community support, making it a popular choice for network configuration tasks.
NEW QUESTION # 152
Refer to the exhibit.
Which setting must be configured to prevent reuse of passwords?
- A. Change Interval
- B. History Count
- C. No Change Interval
- D. Change Count
Answer: B
Explanation:
https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ucs-manager/GUI-User-Guides/Admin- Management/3-1/b_Cisco_UCS_Admin_Mgmt_Guide_3_1/ b_Cisco_UCS_Admin_Mgmt_Guide_3_1_chapter_011.html
NEW QUESTION # 153 
Refer to the exhibit The communication between the web server and the application server experiences poor performance The network engineer must collect the traffic between the two servers, including the payload for more investigation The collected data must be sent from the remote site to the headquarters. Which action accomplishes this goal?
- A. Configure SNMP on N5K-1 to send the data to the monitor server
- B. Configure NetFlow on N5K-1 to send the data to the monitor server
- C. Configure an ERSPAN session between N5K-1 and N5K-2.
- D. Configure a SPAN session between N5K-1 and N5K-2
Answer: C
NEW QUESTION # 154
Which virtual MAC address is the default for HSRP version 2 group 10?
- A. 0000.0C9F.F010
- B. 0000.5E00.0110
- C. 3719.0351.1C0A
- D. 0000.0C9F.F00A
Answer: A
NEW QUESTION # 155
An engineer is enabling port security on a Cisco MDS 9000 Series Switch. Which feature of enabling port security on a Cisco MDS 9000 Series Switch must be considered?
- A. It always learns about switches that are logging in.
- B. It binds the fabric at the switch level.
- C. It can be distributed by using Cisco Fabric services.
- D. It authorizes only the configured sWWN to participate in the fabric.
Answer: C
Explanation:
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/mds9000/sw/6_2/configuration/guides/security/nx-os/sec_cli_6-x/psec.html#92130
NEW QUESTION # 156
Refer to the exhibit.
What is configured as a result of running these commands?
- A. reverse lookup for outbound packets
- B. loose unicast RPF
- C. strict unicast RPF
- D. IP Source Guard
Answer: C
NEW QUESTION # 157
Several production and development database servers exist in the same EPG and IP subnet. The IT security policy is to prevent connections between production and development. Which attribute must be used to assign the servers to different microsegments?
- A. VM name
- B. VMM domain
- C. Data center
- D. IP address
Answer: A
Explanation:
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/aci/apic/sw/3-x/virtualization/b_ACI_Virtualization_Guide_3_0_1/b_ACI_Virtualization_Guide_3_0_1_chapter_0100.html
NEW QUESTION # 158 
Refer to the exhibit. Which action completes the vPC domain implementation?
- A. Allow VLANs on the vPC peer link member interfaces.
- B. Include the VRF management on the vPC domain.
- C. Add the vPC member ports to the vPC channel group.
- D. Configure the system MAC on the vPC domain.
Answer: C
Explanation:
Completing the vPC domain implementation requires adding the vPC member ports to the vPC channel group. This action ensures that all member ports are correctly bundled into the vPC, allowing for consistent forwarding behavior and redundancy across the vPC peer switches2.
NEW QUESTION # 159
What is a benefit of using the Cisco UCS Lightweight upgrade feature?
- A. All servers are rebooted to push the latest updates.
- B. Security updates are scheduled with the next reboot of the fabric interconnects.
- C. The firmware version of a component is updated only when it has been modified
- D. A soft reboot is available for the fabric interconnects.
Answer: C
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ucs-central/GUI-User-Guides/Administration/2-0
NEW QUESTION # 160
An engineer is configuring VNTag between a virtualized server and a Cisco Nexus 5500 Series switch. Drag and drop the configuration steps from the left into the correct order on the right.
Answer:
Explanation:
NEW QUESTION # 161
Which two firmware packages are included in the Cisco UCS C-Series Rack-Mount UCS-Managed Server Software bundle? (Choose two.)
- A. CIMC
- B. system
- C. third-party
- D. BIOS
- E. PSU
Answer: A,D
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ucs-manager/GUI-User-Guides/Firmware-Mgmt/
NEW QUESTION # 162
Refer to the exhibit.
An engineer needs to implement a monitoring session that should meet the following requirements:
* Monitor traffic from leaf to leaf switches on a Cisco ACI network
* Support filtering traffic from Bridge Domain or VRF
Which configuration must be added to meet these requirements?
- A. application app1 epg epg1
- B. interface eth 1/2 leaf 101
- C. application epg epg1 app1
- D. interface eth 1/2 switch 101
Answer: A
NEW QUESTION # 163
Drag and drop the characteristics from the left onto the correct storage systems on the right.
Answer:
Explanation:
Explanation
Graphical user interface Description automatically generated with medium confidence
2,4,5 - NAS 1,3 - SAN
NEW QUESTION # 164 
Refer to the exhibit. An engineer must monitor the Ethernet port and the corresponding VLAN traffic for the hyper4 device The SW3 device is a Cisco Nexus 7000 Series Switch Drag and drop the code snippets from the right into the boxes in the configuration to meet these requirements.
Answer:
Explanation:
Explanation
Graphical user interface Description automatically generated
NEW QUESTION # 165
A DevOps engineer must use Python to manage a Cisco device. The device is in a highly secure DMZ environment. Only trusted Cisco Python libraries can be used.
Which solution meets the requirements?
- A. Develop a containerization application that uses trusted Cisco-provided libraries.
- B. Develop an off-box Python script that uses trusted Cisco libraries.
- C. Develop an on-box Python script that uses trusted Cisco libraries.
- D. Develop an application by using serverless technologies in a primary cloud provider.
Answer: A
NEW QUESTION # 166
Refer to the exhibit. Which feature must be used to configure on switch 2 to establish a VSAN trunk between switch 1 and switch 2?
- A. E Port
Trunk Mode On - B. N Port
Trunk Mode Active - C. NP Port
Trunk Mode Auto - D. F port
Trunk Mode Passive
Answer: A
Explanation:
By default, trunk mode is enabled in all Fibre Channel interfaces. However, trunk mode configuration takes effect only in E-port mode. You can configure trunk mode as on (enabled), off (disabled), or auto (automatic). The default trunk mode is on. The trunk mode configuration at the two ends of an ISL, between two switches, determine the trunking state of the link and the port modes at both ends (see Table 15-1).
Reference:
https://www.cisco.com/en/US/docs/storage/san_switches/mds9000/sw/rel_3_x/configuration/guid es/cli_3_2/trnk.html
NEW QUESTION # 167
An engineer must configure HTTPS secure management for Cisco UCS Manager using a key ring named kr2016 and a key size of 1024 bits. The environment consists of a primary fabric interconnect named UCS-A and a secondary fabric interconnect named UCS-B. Which command sequence must be used to accomplish this goal?
- A. Option B
- B. Option C
- C. Option A
- D. Option D
Answer: A
Explanation:
Explanation
https://www.cisco.com/en/US/docs/unified_computing/ucs/sw/cli/config/guide/1.4.1/CLI_Config_Guide_1_4_1_
NEW QUESTION # 168
An engineer must implement private VLANs for a group of Cisco UCS 8-Series servers. The primary VLAN is present, But the secondary VLAN must Be added to Both fabrics. Which configuration set accomplishes this task?
- A. Option B
- B. Option C
- C. Option A
- D. Option D
Answer: A
NEW QUESTION # 169
An engineer is asked to manage a large-scale data center and collect information from multiple Cisco NX-OS devices using Cisco NX-OS Data Management Engine model. Which technology should be used to accomplish this goal?
- A. NETCONF
- B. NX-API REST
- C. JSON-RPC
- D. NX Yang
Answer: B
Explanation:
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus9000/sw/7-x/programmability/guide/ b_Cisco_Nexus_9000_Series_NX-OS_Programmability_Guide_7x/b_Cisco_Nexus_9000_Series_NXOS_ Programmability_Guide_7x_chapter_010001.pdf
NEW QUESTION # 170
An engineer installed a new Nexus switch with the mgm0interface in vrf management. Connectivity to the rest of the network needs to be tested from the guest shell of the NX-OS. Which command tests connectivity from the shell of the NX-OS?
- A. Option B
- B. Option C
- C. Option A
- D. Option D
Answer: A
NEW QUESTION # 171
A network automation engineer must configure a Cisco NX-OS REST API on a Cisco 9000 Series Switch with these requirements:
* NX-API REST and the DME database must be enabled.
* The NX-API REST must listen for HTTP traffic on port 83.
* The HTTPS certificate must be uploaded.
Which configuration set must be used to accomplish these goals?
- A.
- B.
- C.
- D.
Answer: D
NEW QUESTION # 172
An engineer needs to create a new user in the local user database on Cisco UCS Fabric Interconnect. The user needs permissions to change the following configuration inside UCS Manager version 3.1:
* vNIC and vHBA profiles
* Fan speed and power redundancy profile of UCS Manager
Which two roles must be assigned to a user to achieve this goal? (Choose two.)
- A. server-profile
- B. server-equipment
- C. server-compute
- D. operations
- E. facility-manager
Answer: B,C
NEW QUESTION # 173
An engineer must configure a named VSAN when the fabric interconnect is in Fibre Channel switch mode The VSAN must meet these requirements:
* Named VSAN must be called "VSAN 10".
* VSAN ID must be 10.
* FCoE ID must be 20.
* VSAN 10 must be attached to port 2 in slot 1.
Which command set configures a VSAN when the fabric interconnect is in Fibre Channel switch mode?
- A. Option C
- B. Option A
- C. Option B
- D. Option D
Answer: B
NEW QUESTION # 174
A customer reports Fibre Channel login requests to a cisco MDS 9000 series Switch from an unauthorized source. The customer requires a feature that will allow all devices already logged in and learned in and learned to be added to the Fibre channel active database. Which two features must be enabled to accomplish this goal?
(Choose two.)
- A. Smart aliases
- B. Auto-learning
- C. Port security
- D. Enhanced zoning
- E. Device aliases
Answer: B,C
Explanation:
Explanation
https://www.cisco.com/en/US/docs/storage/san_switches/mds9000/sw/rel_3_x/configuration/guides/fm_3_3_1/p
NEW QUESTION # 175
......
Latest 350-601 Pass Guaranteed Exam Dumps with Accurate & Updated Questions: https://2cram.actualtestsit.com/Cisco/350-601-exam-prep-dumps.html