Updated Apr-2026 Exam D-PST-DY-23 Dumps - Pass Your Certification Exam
Latest Real EMC D-PST-DY-23 Exam Dumps Questions
NEW QUESTION # 59
When Dell S5248F-ON network switches are included with a PowerStore solution, what type of cables are used to connect the PowerStore nodes to the Dell data switches?
- A. 25 GigE Twinax
- B. 100 GigE Twinax
- C. 25 GigE Base-T
- D. 10 GigE Base-T
Answer: A
NEW QUESTION # 60
Use the simulator to create an SMB NAS server using the following information:
* NAS and SMB computer name: payrollserver
* Network interface: BaseEnclosure-bond1
* IP address: 192.168.2.20
* Subnet: /24
* Gateway: 192.168.2.254
* VLAN: 1504
* AD/DNS: 192.168.2.50
* Windows domain name: company.com
* Domain administrator credentials: Administrator/password
When you have finished continue to the next question.
Answer:
Explanation:
See the Explanation below for complete solution.
Explanation:
1. Open the simulator and log in with the default credentials: admin/Password123#.
2. SelectStorage>NAS Serversfrom the left menu.
3. Click+ CREATEto launch the Create NAS Server wizard.
4. Enterpayrollserveras the NAS and SMB computer name and clickNext.
5. SelectBaseEnclosure-bond1as the network interface and clickNext.
6. Enter192.168.2.20as the IP address,/24as the subnet,192.168.2.254as the gateway, and1504as the VLAN ID. ClickNext.
7. SelectJoin a Windows domainas the SMB server type and clickNext.
8. Enter192.168.2.50as the AD/DNS server,company.comas the Windows domain name,Administratoras the domain administrator username, andpasswordas the domain administrator password. ClickNext.
9. Review the summary and clickFinishto create the SMB NAS server.
NEW QUESTION # 61
A Storage Administrator is doing a quarterly space audit on the company's PowerStore T. The Administrator notices that Vol-SMB004 was accidentally set to 5 TB when it should have been set to 4 TB. When going to change the size, the system will NOT accept the change.
What is preventing the change?
- A. Storage Administrator does not have permissions to shrink the volume
- B. Volume size cannot be decreased
- C. There is an active minor alert on the volume
- D. Volume has snapshots
Answer: B
NEW QUESTION # 62
A PowerStore appliance is running out of storage capacity. The cluster consists of a PowerStore 5000T appliance with three NVMe expansion enclosures.
How can this issue be resolved?
- A. Add additional NVMe expansion enclosures.
- B. Enable advanced deduplication.
- C. Add an additional PowerStore appliance.
- D. Add additional SAS expansion enclosures.
Answer: C
Explanation:
PowerStore 5000T and Expansion: The PowerStore 5000T model supports a maximum of three NVMe expansion enclosures. Since the appliance already has three, adding more is not an option. Scaling Out: To increase capacity in this scenario, you need to scale out by adding another PowerStore appliance to the cluster. This will provide additional storage resources and processing power.
NEW QUESTION # 63
Refer to the Exhibit.
Which port location in the graphic is used for network management connectivity on a PowerStore T?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
NEW QUESTION # 64
A PowerStore user has a business need for file system snapshots of NAS Server NAS1 with the following attributes:
Taken M-F every 2 hoursOT
Retention of 2 daysOT
The snapshots must be accessible through the Previous Versions menu in Windows Using the PowerStore Simulator, make the appropriate configuration change.
When you have finished, continue to the next question.
Answer:
Explanation:
see the Explanation for the solution.
Explanation:
1. Launch the PowerStore Simulator and log in with the admin credentials.
2. On the left navigation pane, click Protection and then click Protection Policies.
3. Click Create Policy and enter a name and description for the policy, such as NAS1 Snapshot Policy.
4. Under Snapshot Rules, click Add Rule and configure the following settings:
5. Name: Enter a name for the rule, such as NAS1 Snapshot Rule.
6. Schedule: Select Custom and enter the following cron expression: 0 */2 * * 1-5. This expression means that the snapshots will be taken every 2 hours on Monday to Friday
7. Retention: Select Until and enter 2 days. This means that the snapshots will be deleted after 2 days.
8. Access Type: Select Snapshot. This means that the snapshots will be accessible through the Previous Versions menu in Windows
9. Click Save to create the snapshot rule and then click Next.
10. Under Replication Rules, click Skip. This means that no replication rule will be added to the policy.
11. Click Next and then click Finish to create the protection policy.
12. On the left navigation pane, click Storage and then click File Systems.
13. Select the file system that belongs to NAS Server NAS1 and click More Actions.
14. Click Edit and then click Protection Policy.
15. Select the protection policy that was created in the previous steps, such as NAS1 Snapshot Policy, and click Save.
16. Click Confirm to apply the protection policy to the file system.
NEW QUESTION # 65
An administrator received the following alert from PowerStore regarding a previously created NAS server?
Description: The SMB server of the NAS server PowerStore_NAS_01 is configured to be joined to the domain test.mid, but is currently not joined.
Which setting should the administrator change?
- A. SMB
- B. UDS
- C. NTP
- D. LDAP
Answer: A
NEW QUESTION # 66
When manually migrating a volume between PowerStore appliances, in what order should the tasks be carried out?
- A. 1. Select a volume and then select Migrate
2. Select destination appliance and then start migration
3. Rescan the Hosts
4. Select migrate now - B. 1. Rescan the Hosts
2. Select migrate now
3. Select a volume and then select Migrate
4. Select destination appliance and then start migration - C. 1. Select a volume and then select Migrate
2. Select migrate now
3. Select destination appliance and then start migration
4. Rescan the Hosts - D. 1. Rescan the Hosts
2. Select destination appliance and then start migration
3. Select a volume and then select Migrate
4. Select migrate now
Answer: A
NEW QUESTION # 67
Which two NAS servers must be configured with DNS support? (Choose two.)
- A. Servers that are configured as Standalone.
- B. Servers that are accessed through S3 protocol.
- C. Servers that are used as FTP servers.
- D. Servers that are used for Multiprotocol access.
- E. Servers that are joined to Active Directory.
Answer: D,E
NEW QUESTION # 68
What is a key capability of PowerStore Migration?
- A. Analyzing network security
- B. Managing virtual machine snapshots
- C. Migrating data without downtime
- D. Translating foreign languages
Answer: C
NEW QUESTION # 69
An administrator is connecting a Linux host to a PowerStore appliance and must know which storage network interface to use. Which nvme subcommand should be used?
- A. connect
- B. discover
- C. attach-ns
- D. id-ccrl
Answer: B
NEW QUESTION # 70
SIMULATION
An administrator received a request to provision a new test dev volume.
Use the simulator to provision a volume of 50 GB for their application team. Use a category of Other. The volume performance must not impact the production I/O when the system is heavily loaded.
When you have finished continue to the next question.
Answer:
Explanation:
See explanation below.
Explanation:
NEW QUESTION # 71
What are three requirements of asynchronous file replication? (Choose three.)
- A. Create Remote System.
- B. Create bond 1 and Tag replication.
- C. Configure File Mobility Network.
- D. Configure Data Storage Network.
- E. Create FC zoning between PowerStore.
Answer: A,B,C
Explanation:
Here's a detailed explanation of each requirement:
C . Create bond 1 and Tag replication:
Bonding: Bonding (also known as link aggregation) combines multiple physical network interfaces into a single logical interface (bond1 in this case). This provides redundancy and increased bandwidth for replication traffic. If one physical link fails, replication can continue over the remaining links in the bond.
Tagging: Tagging replication traffic (usually with a VLAN tag) ensures that it is properly routed over the network and isolated from other types of traffic. This helps maintain performance and security for replication.
D . Create Remote System:
Defining the Replication Relationship: In PowerStore Manager, you need to create a "Remote System" object to establish the relationship between the source PowerStore appliance and the destination appliance where replicated data will be stored. This involves specifying the management IP address and credentials of the remote system.
E . Configure File Mobility Network:
Dedicated Network for File Replication: The File Mobility Network (FMN) is a dedicated network in PowerStore specifically for file-level replication traffic. It consists of three additional IP addresses per PowerStore cluster that utilize the existing management network VLAN, gateway, and netmask. These interfaces are mapped to the 1 GbE management ports, sharing the physical port with the existing management interfaces. 1 Isolation and Performance: Using a separate network for file replication ensures that this traffic doesn't interfere with other network activities, such as iSCSI or user access to file shares. This helps maintain optimal performance for both replication and other operations.
Why the other options are incorrect:
A . Create FC zoning between PowerStore: FC zoning is used for block-level storage access (like Fibre Channel SAN), not for file-level replication over Ethernet.
B . Configure Data Storage Network: While a Data Storage Network is essential for general storage traffic, it's not a specific requirement for configuring asynchronous file replication. File replication relies on the File Mobility Network.
Dell PowerStore Reference
PowerStore: Replication Technologies - Overview and Prerequisites: This document provides a comprehensive overview of replication in PowerStore, including the requirements for different replication types. It specifically mentions the need for a File Mobility Network for file replication.
Link to PowerStore documentation: https://infohub.delltechnologies.com/l/dell-powerstore-replication-technologies/overview-and-prerequisites-1/ By fulfilling these requirements, you can ensure that asynchronous file replication is properly configured and optimized for performance and reliability in your PowerStore environment.
NEW QUESTION # 72
Which PowerStore configuration is designed for high-performance, enterprise-grade workloads?
- A. PowerStore M
- B. PowerStore T
- C. PowerStore A
- D. PowerStore S
Answer: B
NEW QUESTION # 73
What is required for metro connectivity in a vSphere environment?
- A. Host is located in remote site
- B. Host is located in local site
- C. Stretched vSphere cluster
- D. VMware SRM is enabled.
Answer: C
NEW QUESTION # 74
Which two statements are true regarding host group configurations? (Choose two.)
- A. Allows mapping volumes to individual hosts in the host group.
- B. Maps volumes to all hosts in the host group.
- C. Allows mixed protocol type hosts within the same host group.
- D. Volume-related operations are made across all hosts in the group.
Answer: B,D
NEW QUESTION # 75
Which three PowerStore resources can be protected by a snapshot rule? (Select 3)
- A. Virtual Machines
- B. Thin Clones
- C. Volume Groups
- D. NAS Servers
- E. Storage Containers
Answer: C,D,E
NEW QUESTION # 76
......
EMC D-PST-DY-23 (Dell PowerStore Deploy 2023) Exam is a vendor-specific certification exam that is recognized by Dell Technologies. Successful completion of the exam demonstrates that an individual possesses the knowledge and skills required to deploy and manage Dell PowerStore storage solutions in a variety of environments. Dell PowerStore Deploy 2023 Exam certification can improve an individual's career prospects and enable them to take on more advanced roles in the storage and data management field.
D-PST-DY-23 Dumps To Pass PowerStore Deploy Exam in One Day: https://2cram.actualtestsit.com/EMC/D-PST-DY-23-exam-prep-dumps.html