5V0-11.21 Dumps - Grab Out For [NEW-2022] VMware Exam
5V0-11.21 Exam Dumps PDF Guaranteed Success with Accurate & Updated Questions
VMware 5V0-11.21 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
| Topic 7 |
|
NEW QUESTION 33
An administrator is creating a runbook of the tasks that the Support team is responsible for within a new VMware Cloud on AWS software-defined data center (SDDC) configured with Hybrid Linked Mode. Which two tasks must be performed by the Support team in both environments? (Choose two.)
- A. Manage the lifecycle of VMware vCenter Server.
- B. Back up and restore workload virtual machines.
- C. Replace failed components.
- D. Monitor workload virtual machines and infrastructure.
- E. Patch guest operating systems.
Answer: A,E
NEW QUESTION 34
Standard security practice for a company requires that all administrator-level user accounts have their passwords changed every 60 days. The [email protected] account password is changed by an administrator through the VMware vSphere Cliento adhere to the security policy. When the administrator attempts to log into the VMware Cloud on AWS vCenter Server through the VMware vSphere Client a few days later as [email protected] using the account credentials copied from the VMware Cloud console, the administrator's access is denied. What is the likely cause of this issue?
- A. When the password for [email protected] is updated from the VMware vSphere Client, the updated password is not reflected in the VMware Cloud console.
- B. The [email protected] password change confirmation email has not been approved by an Organization Owner.
- C. The [email protected] account password should not be changed through the VMware vSphere Client. In order to prevent unauthorized access to VMware Cloud on AWS by non-authorized individuals, VMware will lock the account out.
- D. The [email protected] account password should only be changed through the appliance management interface of the VMware vCenter Server.
Answer: A
NEW QUESTION 35
Which method can be used to deploy a VMware Cloud on AWS software-defined data center?
- A. VMware vCenter Server
- B. REST APIs
- C. AWS Management Console
- D. VMware Data Center Command-Line Interface
Answer: A
Explanation:
You can also use hybrid linked mode to view and manage your onpremises vCenter Server and the one in your VMware Cloud on AWS SDDC with a common set of user identities.
NEW QUESTION 36
What are three possible reasons that would prevent virtual machines from migrating to VMware Cloud on AWS using VMware vSphere vMotion? (Choose three.)
- A. Remote devices are attached.
- B. Paravirtual SCSI disks are mounted.
- C. VMware Tools are NOT installed.
- D. The virtual machine (VM) is a linked clone.
- E. The virtual machine (VM) remote console is open.
- F. Virtual serial ports are connected with network output.
Answer: B,C,D
NEW QUESTION 37
A customer is running a software-defined data center (SDDC) in the US-West-1 region and wants to connect the workload network segment to their on-premises data center and their company Amazon Virtual Private Cloud (VPC) running in US-West-1. Which two supported connectivity options can they use to accomplish this? (Choose two.)
- A. Two virtual private networks (VPNs)
- B. VMware SD-VVAN by VeloCloud
- C. One virtual private network (VPN) and one VPC Peering
- D. VMware Managed Transit Gateway (VTGVV)
- E. VMware HCX
Answer: A,B
NEW QUESTION 38
Which two statements are true for the pre-defined resource pools in VMware Cloud on AWS? (Choose two.)
- A. Users are allowed to monitor and modify the resource allocation settings in the Mgmt-RsourcePool.
- B. All workload virtual machines are created in the top-level (root) Compute-ResourcePool by default.
- C. Users can rename child resource pools to better match company policy.
- D. The Mgmt-Re source Poo I is able to utilize resources in subsequently created clusters if needed.
- E. Users can modify the pre-configured vSphere DRS settings in their own Compute-ResourcePool.
Answer: B,C
Explanation:
Rename the resource pools to better match company policy.
By default, all workload virtual machines are created in the top-level (root) Compute-ResourcePool.
Reference:
https://docs.vmware.com/en/VMware-Cloud-on-AWS/services/com.vmware.vsphere.vmc-aws-manage-data-center-vms.doc/GUID-CCC16E07-7017-44B4-948E-A558A87BA070.html
NEW QUESTION 39
An organization has purchased both VMware Cloud on AWS and VMware vRealize Network Insight Cloud. Which additional integrated functionality are they able to utilize?
- A. Collection of underlying AWS networking information sent to VMware vRealize Network Insight Cloud without additional configuration
- B. Automatic software-defined data center (SDDC) grouping in VMware Cloud on AWS
- C. Automatic creation of network segment in VMware Cloud on AWS by VMware vRealize Network Insight Cloud
- D. Creation of VMware HCX mobility groups from VMware vRealize Network Insight Cloud discovered applications
Answer: D
Explanation:
You can export waves of VMware vRealize Network Insight discovered applications to HCX for migration as Mobility Groups. HCX integration with vRealize Network Insight is available through API calls.
NEW QUESTION 40
Due to a recent acquisition, an architect is being asked to identify and design a cloud-based solution that will assist in merging several data centers together without incurring undue operational overhead while adhering to a very strict project timeline. The proposed solution must have the capability to be rapidly recovered in the event of a cloud provider outage. After careful consideration, the architect determines that VMware Cloud on AWS would be an appropriate solution, requiring a total of nine hosts for capacity. Which additional configuration options would satisfy the requirements of this project?
- A. * Deploy a VMware Cloud on AWS software-defined data center (SDDC) with a single stand-alone cluster.
* Deploy a second stand-alone cluster into the SDDC in a separate region.
* Configure VMware Cloud Disaster Recovery to replicate and protect workloads to the second cluster. - B. * Deploy a VMware Cloud on AWS software-defined data center (SDDC) with a single stand-alone cluster.
* Deploy a second SDDC with a stand-alone cluster into a different AWS region.
* Configure VMware Cloud Disaster Recovery to replicate and protect workloads to the second cluster. - C. * Deploy a VMware Cloud on AWS software-defined data center (SDDC) with a single stretched cluster across two separate regions.
* Configure the cluster to ensure that all virtual machines can be restarted in the second region with a near zero recovery point objective (RPO) in the event of any environment or system failures. - D. * Deploy a VMware Cloud on AWS software-defined data center (SDDC) with a single stretched cluster across two separate availability zones.
* Configure the cluster to ensure that all virtual machines can be restarted in the second availability zone with a near zero recovery point objective (RPO) in the event of any environment or system failures.
Answer: D
NEW QUESTION 41
When configuring Hybrid Linked Mode from the vCenter Cloud Gateway appliance, which groups are mapped from a customer's on-premises environment to the cloud?
- A. vSphere Groups
- B. LDAP Groups
- C. Active Directory Groups
- D. Local Groups
Answer: C
NEW QUESTION 42
What are three valid migration modes in VMware HCX? (Choose three.)
- A. HCXvMotion
- B. Cross vCenter vMotion
- C. Bulk Migration
- D. Hybrid Linked Mode
- E. Replication Assisted vMotion (RAV)
- F. Planned Failover
Answer: A,C,E
NEW QUESTION 43
Which statement is true regarding how vSphere High Availability (HA) provides rapid recovery from outages in VMware Cloud on AWS?
- A. vSphere HA restarts impacted virtual machines (VMs) on another host when a VM stops sending heartbeats or the VM process fails (vmx).
- B. Sphere HA restarts virtual machines if their host becomes isolated on the VMware vSAN network.
- C. vSphere HA is enabled by default in VMware Cloud on AWS but can be disabled or modified.
- D. vSphere HA restarts impacted virtual machines on another host when an application fails.
Answer: D
Explanation:
Hosts in the cluster are monitored and in the event of a failure, the virtual machines on a failed host are restarted on alternate hosts.
NEW QUESTION 44
To assist with seasonal workload demands over the next two months, a group of interns are hired to assist with day 2 virtual machine operations in VMware Cloud on AWS. Which method should be used for creating these temporary user accounts and assigning the appropriate permissions to them?
- A. Log into vCenter in VMware Cloud on AWS with the CloudAdmin account. Create the required number of user accounts in the vmc.local SSO domain and assign the appropriate roles to the accounts.
- B. Log into on-premises VMware vCenter. Create the required number of user accounts in the vsphere. local SSO domain and assign the appropriate roles to the accounts. Ensure that Hybrid Linked Mode is enabled to allow account propagation to the VMware Cloud on AWS SSO domain.
- C. Create the required user accounts within Active Directory and assign them to the required group. With Hybrid Linked Mode enabled, assign the correct role in VMware Cloud on AWS to the Active Directory group that contains the user accounts.
- D. Log into vCenter in VMware Cloud on AWS with the CloudAdmin account. Create the required number of user accounts in the vsphere. local SSO domain and assign the appropriate roles to the accounts in Active Directory.
Answer: B
NEW QUESTION 45
A customer wants to ensure that VMware Cloud on AWS maintenance operations are performed during their maintenance window. Which option would allow the customer to achieve this outcome?
- A. Schedule a call with AWS Support and schedule a maintenance window.
- B. Schedule a call with VMware Cloud on AWS Support and schedule a maintenance window.
- C. Schedule a maintenance window through an online support request.
- D. Schedule a maintenance preference in the software-defined data center (SDDC) console.
Answer: D
NEW QUESTION 46
An administrator runs an analysis on all workloads using Live Optics and confirms there are a variety of applications, including Microsoft SQL server and Oracle databases. The Microsoft SQL workloads are averaging 4,000 IOPS per virtual machine, approximately 50% writes. The Oracle workloads are averaging 3,000 IOPS per virtual machine, and approximately 80% writes. Which method should be used to input the data into the VMware Cloud on AWS Sizer for the most accurate results?
- A. Use the Advanced Sizer in 'import' mode. Import the Live Optics data and let the Advanced Sizer set the values forvCPU. vRAM. utilized storage. IOPS and I/O automatically.
- B. Use the Quick Sizer. Set the values forvCPU, vRAM. utilized storage. IOPS and I/O profile manually.
- C. Use the Advanced Sizer in 'manual' mode. Create workload profiles for the analyzed virtual machines, including profiles for Microsoft SQL and Oracle. Use the default values for the SQL and Oracle workload profiles.
- D. Use the Advanced Sizer in 'database' mode. Create workload profiles for the analyzed virtual machines, including profiles for Microsoft SQL and Oracle. Set the values forvCPU. vRAM. utilized storage. IOPS and I/O profile manually.
Answer: C
NEW QUESTION 47
An administrator deploys a virtual machine and configures it to perform backups to an AWS Simple Storage Service (S3) bucket. After the first month of use, the administrator receives a bill from AWS indicating egress charges were applied to the backup traffic leaving the software-defined data center (SDCC), destined for the AWS S3 bucket. What can the administrator do to ensure backup traffic travels to the linked Amazon Virtual Private Cloud (VPC) through the Elastic Network Interface?
- A. Configure Direct Connect to a private virtual interface for access to AWS services.
- B. Create a gateway endpoint in the linked AWS VPC and configure it for use with the S3 bucket.
- C. Configure a route-based virtual private network (VPN) for the SDDC to the VPC.
- D. Configure the S3 bucket with a public endpoint accessible over the Internet through HTTPS.
Answer: C
NEW QUESTION 48
A consultant is asked to help evaluate an environment for deployment into a new software-defined data center (SDDC) in VMware Cloud on AWS. The consultant is provided with a comma-separated value (CSV) file containing a list of workloads exported from VMware vCenter detailing only virtual machine configuration data, including vCPU, vRAM, and utilized storage. How should the consultant use the VMC on AWS Sizer?
- A. Use the Advanced Sizer. Import the CSV file from VMware vCenter Server and let the VMware Cloud on AWS Sizer set the values for configured resources.
- B. Use the Advanced Sizer. Import the CSV file from VMware vCenter Server and let the VMware Cloud on AWS Sizer set the values for configured resources.
- C. Use the Quick Sizer. Manually enter the number of virtual machines and total resources for configured resources.
- D. Use the Advanced Sizer. Create workload profiles for the different workload types and set the values for configured resources manually.
Answer: C
NEW QUESTION 49
An administrator recently completed the first migration of on-premises production workloads into VMware Cloud on AWS. The administrator intends to scale the hybrid cloud environment in a phased approach over the next 12 months, but the Service Owner has some concerns about being able to complete workload optimization and balancing, capacity and cost management, and compliance reporting. Which VMware solution should the administrator recommend to address the concerns of the Service Owner?
- A. VMware vRealize Operations Cloud
- B. VMware vRealize Log Insight Cloud
- C. VMware vRealize Automation Cloud
- D. VMware vRealize Network Insight Cloud
Answer: C
NEW QUESTION 50
......
Get New 5V0-11.21 Certification Practice Test Questions Exam Dumps: https://2cram.actualtestsit.com/VMware/5V0-11.21-exam-prep-dumps.html